Pick and Place Machine SLT450 with 4 Heads 50 Feeders PNP Machine

Machine SLT450 can meet 0201 component
Maximum circuit board area: 400*200 mm
Number of mounting heads: 4
Maximum movement range of Z axis: 20 mm
Maximum mounting rate: 9,500 PCS/hour
Average mounting rate: 8,000 PCS/hour
Positioning accuracy: 0.01 mm
Buffering range of suction nozzle: 4.5 mm
Power supply: 220V/110V, 50 Hz
Compressed air: 0.6-0.7 Mpa
Average power: 400 W
Recognition Mode: Four Heads Synchronized Recognition
Number of cameras: a Mark camera, four high-speed cameras, a high-definition camera
Product weight: 210KG
PCB access mode: automatic Left-in and right-out access, supporting left-right device connection function
Quantity of trays: Up to 48 non-feeder feeding components are supported, each of which can specify its coordinates within the mounting range.
Complex speed to mount resistance and Chip: 6000/h
Mounting accuracy range: 0201-40*40mm,Pin spacing 0.3mm
Chip(Matching which support electric feeder can mount the 0402,0201)
Quantity of feeders: 50 PCS
Service motor: Panasonic servo motor
Guide rail: Taiwan TBI Linear Guide rail
Driving mode: Taiwan TBI ball screw
Nozzle Vacuum Source: Japan CKD High Speed On-off Vacuum Generator with Vacuum Damage
Minimum air capacity of pump: 80-120 L/min, volume more than 60 L
Gas quality requirements: oil-water separation device, dust filter device, air pressure stabilization device
Dimension: 900×1140×900mm