When we use diamond saw blades, we should pay special attention to potential safety hazards and avoid accidents. During the sawing process of diamond saw blade, the serious deflection of stone saw blade may occur, which leads to the increase of equipment current and can not continue sawing.

First, the deflection of the diamond saw blade matrix is caused by the deformation, which is mainly manifested by the excessive width of the slit. At this time, the matrix can be corrected to solve the problem.

Secondly, due to the friction between the base of diamond blade and the rock walls on both sides of the cutting seam, the main performance is that the width of the cutting seam is basically normal.